The product consists of a kettle body, a kettle lid, a jacket, a stirrer, a transmission device, a shaft sealing device, a support and the like. The stirring form generally has anchor type, paddle type, turbine type, push type or frame type, etc. When the high diameter is relatively large, the stirring device can be used with multiple layers of stirring blades, and can also be arbitrarily selected according to the requirements of the user. A jacket is arranged outside the wall of the kettle, or a heat exchange surface is arranged in the vessel, and heat exchange can also be performed through the outer circulation. Heating methods include electric heating, hot water heating, heat transfer oil circulation heating, far infrared heating, and outer (inner) coil heating. The cooling method is jacket cooling and coil cooling in the kettle, and the form of the stirring blade. The support seat has a support type or an ear mount or the like. Gear speed reducer should be used when the speed exceeds 160 rpm. The number, specifications or other requirements of the opening can be designed and manufactured according to user requirements.
The steam heating reaction kettle is composed of a pot body, a pot cover, a stirrer, a heating jacket, a support and a transmission device, and a shaft sealing device. The pot body, lid, agitator, shaft seal, etc. are all made of Icr18Ni9Ti stainless steel. The pot body and the lid are sealed by flange sealing, the lower part of the pot body has a discharging hole, the pot has a stirrer, the pot lid is opened, the stirring observation, the temperature measuring pressure, the steam drawing fractionation, the safety venting, etc. . On the upper welding bracket of the lid, the reducer and the motor are installed, and the stirrer in the pot is driven by the drive shaft, and the shaft sealing device is on the top of the lid. The heating jacket is provided with inlet and outlet oil (steam) temperature measurement, and venting steam valve, electric heating rod and the like.
Due to different production processes and operating conditions, the lid process is open, agitated (with paddle, anchor, frame, screw, etc.), support type (suspended or supported) and filler Different requirements, such as sealing devices, can be designed separately from our factory.
 Needle Tube
Syringes can also call Disposable Medical Supplies, Disposable Syringe With Needle and Plastic Needle Tube such as some scientific instruments in chromatography to inject through the rubber septum. Injecting gas into a blood vessel will cause an air embolism. The way to remove air from the syringe to avoid embolism is to turn the syringe upside down, tap it lightly, and squeeze out a little bit of fluid before injecting into the bloodstream.
In some cases where accuracy is not the primary concern of germs, such as quantitative chemical analysis, glass syringes are still used due to the small error of the glass syringe and the smooth movement of the push rod.
You can also inject some of the juices into meat with a syringe to improve taste and texture while cooking, or into pastries when baking. Syringes can also fill ink cartridges with ink.
Disposable Medical devices Medical Blood Collecting Needle
Needle Tube,Disposable Blood Needle,Disposable Syringe With Needle,Plastic Needle Tube
Haloxylon Ammodendron Medical Equipment Co., Ltd. , https://www.haloxylonhospital.com