The mountain bee is a kind of wild economic insect. It collects honey from the flowers of the natural world and is a honey product. The market price can reach 30-40 yuan per kilogram. In general, raising a barrel of mountain bee can get about 25 kilograms of honey a year. If the bees are strong, the source of honey is good, and the climate is suitable, each bee can produce 40-50 kilograms of honey. At present, it is the peak period of the mountain bees grouping. Bringing mountain bees to home farming is a good project with less investment and quick results. The production and placement of bee barrels consists of a bottom barrel, a barrel, a barrel bottom, and a bucket cap (cover). The bottom barrel and the following barrel can use round wood with a length of 1-1.2 meters and a diameter of about 0.4 meters. They are hollowed out with a chisel and cleared of internal wood chips. The inner wall of the barrel should not be too smooth. A 4 cm long and 1 cm tall nest door is made at the edge of the bottom of the barrel. After the system is properly dried, the wax is evenly hung on the inner wall of the barrel so that the mountain bees can collect the honey and wax after the settlement. In general, the bucket is more than twice as long as the bottom bucket, and there is also a combination of a bottom bucket and a stepped bucket. The bottom of the bucket can be made of circular planks that are slightly larger than the bottom of the bee bucket. The rest of the joint between the bottom of the bucket and the bee bucket should be sealed except for the nesting door. The upper part of the barrel is generally made of bark or Other wood and the conical bucket cap with a moderate size of the mouth of the bee barrel. The bottom edge of the barrel cap is about 10 cm long. The junction between the bucket cap and the bucket mouth should also be sealed, and the bucket cap, bucket, and the bottom of the bucket should be connected and fixed. After the bee barrels are ready, they will be placed in a sheltered area near the house, with trees behind them, open fronts, no water in summer, and no snow in winter. When putting the barrel, the beehive should be as high as possible to prevent rats, ants, etc. from entering the nest. The bees should be scattered and placed in a stable and firm manner to prevent the bees from escaping. When receiving the bee method, the operator must wear bee caps and other protective equipment. The commonly used method of receiving bees is the nest door access bee method and the group gathering method. The nest gates receive the bee method: When the bees colony begins to fly into the shape of a megaphone, a hand holds a bucket cap coated with honey, and the other hand holds the grass handle to quickly place the bee queen on the bucket cap. After the hand leaves, the mountain bees will quickly wrap up and grow bigger. At this time, the bucket cap can be lightly placed on the bee bucket. When most of the bees in this group enter the barrel and then tightly capped and fixed, the nest door is then reduced or closed, and the beehive is properly moved at night. After the colony enters the barrel, care should be taken to care for it. If the barrel is quiet, the nest door can be opened; if the barrel is not quiet, the nest door can be closed at any time. Collecting and gathering: When the bees fail to receive the bees at the nest gate, the queen will not fly too far for the first time and it will usually fall on the nearby trees, eaves, etc. At this time, the bee-keeper can take a ladder, put a bee cap on one hand and approach the bee colony on the top of the bee, and the other hand to drive the bee from below with the grass until the queen bee and the whole herd are under the bucket cap. When the group is formed, the bucket cap is removed and the bee is introduced into the bucket. In this period, if the harvest is unsuccessful, bee colonies will migrate to distant places. At this time, the bee can be soaked with hand or hand to soak up the peat soil or splash water to block the way and force it to stay on nearby trees or eaves, etc. Recaptured again. In addition, when wild swarms are spotted on branches, branches can be sawn and the bee can be placed in the bee barrel. It can also be shaken off in a face bag and brought back into the bee barrel. When a mountain bee is found in a stone crevice, an empty bee can be set up on the hill to attract the colony bees to live. When the bee colony enters normal work quietly, it can be taken home at night.
Novelty Hardware Manufacturer , http://www.ywtattooneedles.com