During the run-in period after overhaul of the engine, improper use may often result in a series of failures. In order to prevent the engine from “holding the cylinderâ€, the following points must be observed when using it: 1. The cooling water is not needed, the cooling system is working properly, and the lubrication system is working well. During the run-in period, do not increase the speed and do not overload. When the engine temperature increases, there is a tendency to slow down and stall, avoid increasing the throttle to increase the speed. At this point should immediately reduce the throttle, reduce speed or stop, let the engine rest, and then slowly increase the speed after the temperature dropped. 2. If the engine suddenly stops during operation, and the oil and circuit of the engine are normal, it is very likely that a "hold cylinder" has occurred. At this time, it is necessary to cool the engine before processing. The specific method is as follows: Shake the engine slowly, if the engine does not move at this moment, do not force to shake, avoid pulling the piston or cylinder. To remove the spark plug or injector, or to open the decompression device, inject a small amount of engine oil into the cylinder, and then shake, until the engine can rotate freely. Start the engine again, idling for a few minutes, then gradually increase the speed, and wait until it is normal to work. After the engine has “held the cylinderâ€, it is forbidden to use the cooling water to flush the cylinder block so as to avoid cracks in the cylinder block due to sudden temperature drop. If the engine generates a serious "hold cylinder", it cannot be started or towed forcibly. It must be stopped immediately, and the engine repaired after cooling.
Lose Weight Ingredient (weight loss, Weight Control) supplier Organic Herb Inc's range of products include: Safflower Extract (Carthamin), Strawberry Extract, cacao extract (cocoa flavanols ), moyeam Tea Extract (Dihydromyricetin), black Rice Extract (anthocyanidin), Apple Extract Polyphenol, Griffonia Simplicifolia Extract (5-HTP), Mulberry Leaf Extract (1-Deoxynojimycin) etc.
Many people is struggled to lose weight .It is still not clearly understood the reason why some people will get overweight .However ,scientific studies showed some of the natural plant extract may help us to control weight. The herbal extracts manufacturer and provider-- Organic Herb Inc is a China-based company which is committed to producing ,developing and exploring a wide rang of natural plant extracts with weight lose ingredient .OHI has been using fresh organic raw materials and following highest standard of manufacture to produce Lose Weight extract powder to ensure the safety and benefit of our customers over the world.
Lose Weight Ingredient
Lose Weight Ingredient,Coffee Bean Extract,Nutritional Ingredient Lose Weight,Lose Weight Slim Ingredient
Organic Herb Inc. , https://www.extracts.pl