Water-proof constant temperature incubator use method:
First fill the water inlet from the water inlet (below the side plate) in the stainless steel inner tank, the water level is up to the overflow (above) water outlet, close the lower water inlet, then turn on the power, turn on the power switch, and set the required temperature (warm) The instruction manual of the controller is attached. After the temperature is constant, the items to be cultivated are placed in the working room, and the studio door is closed to start the experiment.
Waterproof constant temperature incubator Note:
a.) It is strictly forbidden to dry without water. Heat to avoid burning the heating tube. The water level is visible when the side inlet hose is erected.
b.) The instrument case should be properly grounded to avoid accidents.
c.) Do not invert the instrument to prevent water from overflowing.
d.) In order to reduce the scale generation, it is recommended to use distilled water products. Keywords: water-proof constant temperature incubator
It is a professional supplier of Body building products : sarms products ; peptides products ; steroids ; finished oil ; hormone products , and natural active ingredients. It has absolute advantage because of strong research strength, modern management system and high-quality marketing team.
Now we have 3 GMP standard workshop, Meanwhile, the factory is equipped with the researching and quality inspection centre, with strong technology research and development strength. We also have 3 salesdepartments over 30 people and sell our products all over the world.
For customer`s needs, OEM service is also acceptable. If you have a good idea in new product production but lack of laboratory device and human resource, we are glad to solve this problem for you. Sincerely hope to strengthen exchanges and cooperation with friends from both home and abroad.
Body building, sarms products, peptides products, steroids, finished oil
Xi'an Henrikang Biotech Co.,Ltd , https://www.henrikangbio.com