The superconducting heat-conducting coal-fired hot air blower series jointly developed by Kunming Yinhua Horticultural Equipment Co., Ltd., Kunming Qingcheng Flower Co., Ltd., and Shenyang Jinniu Economic and Technological Trade Center Heat Furnace Plant is a coal-fired, dedicated greenhouse Heating and material drying equipment. Its small size, light weight, low manufacturing cost, high heat transfer rate, and easy cleaning are new products that fill in blanks at home and abroad. First, the working principle It consists of furnace (combustion chamber), super heat pipe, flue, dust collector, coal dust collection box, fan, electric control box and the body of eight parts, the heat generated by coal combustion in the furnace by the super The ducts are collected and distributed, and the starter fan forces the air to exchange. The scientific design of the flue and the automatic control of the start and stop of the fan enable the heat conducted by the heat pipe to be fully utilized. Second, the core technology 1, super heat pipe: built-in special formula liquid chemical medium seamless metal tube, when the heat pipe heat temperature rises to 55 °C, the liquid chemical medium starts heat conduction (conduction speed close to the speed of sound), the heat pipe vacuum sealed production Process, with reliable safety, axial fans quickly spread the heat of the heat pipe, so as to achieve the purpose of high efficiency and energy saving. This technology has obtained the national patent (Patent No.: ZL 93 2 41027.8). 2. Coal dust collection box: The bottom part of the furnace and the bottom of the dust collector are all designed with a drawer-type dust collection box. The large box is located under the hearth and collect the inside of the furnace. Coal dust and dust after combustion, with a dust collector in the middle of the flue, effectively reducing the amount of dust at the outlet of the flue, and the small box is placed in the lower part of the dust collector to collect the dust after burning in the flue. In addition to igniting and igniting the equipment, there is a small amount of black smoke at the chimney exit, after normal combustion (recommended: the fuel uses as much as possible anthracite or coking coal) and there is no obvious smoke and dust, which basically ensures that the use environment is clean and reduces pollution. Third, installation and use instructions 1, coal mouth and chimney placed outdoors, hot air outlet placed indoors, to ensure outdoor combustion, indoor heat, smoke and dust outside. 2. Interchangeable multi-port flue design makes it very convenient to clean the flue. The flue cleaning mouth is completely sealed by a blind flange. 3. The hot air outlet and the plastic air supply pipe are connected to the room to extend evenly to facilitate even air supply. 4, the wall opening size should be matched with the size of the shell in order to seal. 5. The bottom coal dust collection box of the furnace is preferably lower than the ground, so it is beautiful and convenient to operate.
The
medical central gas supply system plays a significant role in modern hosptial.
The appropriate design and setup of medcal gas equipment are essential for the
hospitals to ensure medical quality, as well as to save the lives and ease the
pain of the gas station,Bed Head Unit,gas terminal, electrical system,nusre
call system, medical pipelines and auxilliary equipment system.
Central Gas Supply System
Central Gas Supply System,Hospital Central Gas Supply System,Hospital Gas Supply System ,Medical Gas Supply System
Hunan Eter Electronic Medical Project Stock Co., Ltd. , http://www.centralgas.be